GS1200 Series User’s Guide
43
Per Port Status
Port This identifies the Ethernet port on the Switch.
Link status This field displays the current status or speed (either 10 Mbps, 100 Mbps or 1000 Mbps) of each
port.
TX(Pkts) This field shows the number of transmitted frames on this port.
RX(Pkts) This field shows the number of received frames on this port.
Loop Status It displays Loop when the Switch detects a loop on the port. Otherwise, it displays Normal.
PoE Status (W)
(GS1200-5HP v2
& GS1200-8HP
v2)
This field displays the amount of power the Switch is currently supplying to the PoE-enabled
device connected to the port.
Clear Click this button to clear the statistics in the TX(Pkts) and RX(Pkts) fields.
Refresh Click this button to update the information in this screen.
Table 6 System (continued)
LABEL DESCRIPTION
To Next Page
Loading...
