EasyManua.ls Logo

ZyXEL Communications GS1920-24HPv2 - Page 113

ZyXEL Communications GS1920-24HPv2
483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 18 Cloud Management
GS1920v2 Series User’s Guide
113
The following table describes the labels in this screen.
Cloud Management Mode
Enable the switch button to turn on NCC discovery on the Switch. If the Switch has Internet access and
has been registered on the NCC, it will automatically go into cloud management mode. Follow the
steps to register your Switch on NCC:
1 Download the Nebula Mobile App
First, download the app from the Google Play store for Android devices or the App Store for iOS devices
and create an organization and site.
You can scan an app store QR code to open the app installation page on the app store.
2 Scan the Device QR code
The Register Device QR code in this screen contains the Switch’s serial number and the registration MAC
address for handy NCC registration of the Switch using the Nebula Mobile app.
Follow the wizard in the Nebula Mobile app to scan the QR code to register the Switch on NCC and add
the Switch into a site.
If Nebula Control Center (NCC) Discovery is disabled, the Switch will NOT discover the NCC and remain
in Standalone mode.
Table 27 SYSTEM > Cloud Management
LABEL DESCRIPTION
Nebula Control
Center (NCC)
Discovery
Enable the switch button to turn on Nebula Control Center (NCC) discovery on the Switch.
This field displays:
The Switch Internet connection status.
The connection status between the Switch and NCC.
The Switch registration status on NCC.
To pass your Switch management to NCC, first make sure your Switch is connected to the
Internet. Then go to NCC and register your Switch.
1. Internet
Green – The Switch is connected to the Internet.
Orange – The Switch is not connected to the Internet.
2. Nebula
Green – The Switch is connected to NCC.
Orange – The Switch is not connected to NCC.
3. Registration
Green – The Switch is registered on NCC.
Gray – The Switch is not registered on NCC.
Note: All circles will gray out if you disable Nebula Discovery.
Connection
Status
This table displays the NCC connection status information.
Use status logs in the Internet, Nebula, and Registration fields for connection troubleshooting.

Table of Contents

Related product manuals