Need help?Do you have a question about the ZyXEL Communications GS2210-24HP and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | GS2210-24HP |
| Category | Switch |
| Language | English |
Guides users on how to access the Switch's web configurator for management.
Describes the initial screen displayed after logging into the web configurator.
Explains how to reload the factory default configuration file to reset the Switch.
Details how to create a VLAN and assign ports to it for network segmentation.
Guides on setting the Switch's management IP address for network access.
Provides a step-by-step guide for enabling and configuring DHCPv4 snooping.
Explains how to configure the Switch to forward DHCP client requests to a specific DHCP server.
Explains how to view general device information, system status, and IP addresses.
Displays port statistical summaries with links to detailed port information.
Shows how to view general system information like firmware version and hardware details.
Details how to configure the Switch IP address, default gateway, and management VLAN ID.
Explains how to configure settings for individual Switch ports.
Guides on configuring static VLANs to define port membership and behavior.
Details how to configure static VLAN (802.1Q) settings on individual ports.
Explains how to group traffic into logical VLANs based on source IP subnet.
Guides on manually entering static MAC addresses for port forwarding.
Explains how to configure rules to forward specific multicast frames to designated ports.
Guides on creating rules for traffic filtering based on specified criteria.
Details how to configure Rapid Spanning Tree Protocol (RSTP) settings.
Guides on configuring Multiple Spanning Tree Protocol (MSTP) settings.
Guides on configuring bandwidth limits for incoming and outgoing traffic flows on ports.
Guides on configuring limits for broadcast, multicast, and DLF packets per second.
Guides on selecting a monitor port and specifying traffic flow for examination.
Guides on configuring static link aggregation settings.
Explains how to enable Link Aggregation Control Protocol (LACP) for dynamic aggregation.
Guides on enabling port authentication methods and configuring RADIUS server settings.
Details how to activate IEEE 802.1x security for port authentication.
Guides on enabling port security and disabling MAC address learning.
Guides on defining schedules for time-oriented features.
Guides on defining classifiers and specifying actions for matching traffic flows.
Explains configuring match order and enabling logging for classifiers.
Guides on configuring policy rules to define actions for classified traffic flows.
Guides on configuring queuing algorithms for outgoing traffic.
Explains how to enable IGMP snooping for efficient multicast traffic forwarding.
Shows IPv6 multicast group information.
Guides on creating multicast VLANs and selecting receiver/source ports.
Guides on configuring RADIUS server settings for authentication.
Details configuring TACACS+ server settings for authentication.
Explains configuring authentication, authorization, and accounting methods.
Guides on viewing bindings for DHCP snooping and ARP inspection.
Explains managing static bindings for DHCP snooping and ARP inspection.
Guides on enabling DHCP snooping and configuring the database.
Explains enabling ARP inspection and configuring log settings.
Guides on enabling Loop Guard on the Switch and specific ports.
Guides on enabling layer 2 protocol tunneling and specifying MAC addresses for encapsulation.
Guides on configuring the PPPoE Intermediate Agent on the Switch.
Details configuring subscriber information for PPPoE clients.
Explains specifying trusted/untrusted ports and adding extra information to discovery packets.
Provides access to error disable related configuration screens.
Guides on limiting control packet rates to protect the CPU.
Explains detecting control packet rate limits and configuring actions.
Details setting up automatic recovery for disabled ports.
Guides on specifying ports for isolation and promiscuous communication.
Guides on configuring EEE, Auto Power Down, and Short Reach settings.
Lists screens for configuring LLDP parameters and viewing status.
Displays a summary of LLDP status on the Switch.
Shows LLDP status for neighboring devices connected to the Switch.
Guides on configuring network policies for LLDP-MED.
Shows which ports are trusted, forwarding traffic, or disabled.
Explains enabling Anti-Arpscan, setting thresholds, and configuring port trust states.
Shows whether BPDU Guard is enabled and the port status.
Guides on enabling BPDU Guard on the Switch and its ports.
Shows the configuration of ports where Ethernet OAM is enabled.
Guides on enabling Ethernet OAM and configuring related settings.
Explains how to perform remote loopback tests for link diagnostics.
Displays details of unidirectional and bidirectional links discovered by ZULD.
Guides on enabling ZULD, configuring mode, and setting probe time.
Details configuring and enabling IPv4 static routes.
Guides on activating DiffServ for marking rules or IEEE 802.1p priority mapping.
Explains configuring DSCP to IEEE 802.1p mapping for traffic prioritization.
Explains configuring DHCP relay for clients and servers not in the same broadcast domain.
Guides on configuring global DHCPv4 relay settings.
Configures DHCP settings based on the VLAN domain of DHCP clients.
Guides on accessing the ARP learning mode configuration screen.
Explains configuring ARP learning modes per port.
Provides access to firmware and configuration file management functions.
Guides on upgrading the Switch firmware to the latest version.
Explains how to restore a previously saved configuration file.
Guides on saving current device settings for later use.
Displays the main access control configuration screen.
Guides on configuring SNMP settings for network management.
Explains how to configure administrator and user login accounts.
Guides on specifying trusted computers for managing the Switch.
Guides on using tools like ping, traceroute, and port tests for troubleshooting.
Guides on checking current system logs for events and reasons.
Guides on configuring system logging and external syslog servers.
Shows the role of the Switch within the cluster and access to member switch configurators.
Guides on configuring clustering management settings.
Guides on checking if MAC addresses are dynamic or static.
Guides on viewing IP-to-MAC address mappings and removing dynamic ARP entries.
Guides on viewing IPv6 path MTU information on the Switch.
Guides on copying basic and advanced settings from a source port to destination ports.
Guides on viewing IPv6 neighbor information on the Switch.
Provides solutions for problems related to accessing the Switch and logging in.
Offers advice for issues related to lost configuration settings after a restart.
Lists essential information to have ready when contacting customer support.
Provides contact details for ZyXEL's global headquarters and regional offices.
Lists commonly used services, their protocols, port numbers, and descriptions.
Explains the format and abbreviation of IPv6 addresses.
Introduces DHCPv6 as a server-client protocol for assigning IPv6 addresses.
Provides regulatory compliance information for different regions.
To Next Page