Need help?Do you have a question about the ZyXEL Communications GS2200 Series and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | GS2200 Series |
| Category | Switch |
| Language | English |
Lists the methods available for managing the Switch, including Web Configurator, CLI, FTP, and SNMP.
Describes the console port for local management using terminal emulation software.
Provides a description of the LEDs on the Switch for status indication and troubleshooting.
Details the process of accessing the web configurator by entering the Switch's IP address in a web browser.
Recommends changing the default administrator password upon first login for security.
Explains how to save changes to run-time memory and nonvolatile memory for persistence.
Covers procedures for reloading the factory-default configuration file or resetting the Switch.
Explains how to confine broadcast frames to a VLAN group by configuring port-based or tagged VLANs.
Details how to configure the Switch IP address and default gateway for management purposes.
Walks through configuring DHCP snooping to enhance network security by filtering DHCP packets.
Explains how to configure the Switch to forward DHCP client requests to a specific DHCP server.
Explains configuration of Switch IP address, default gateway, DNS, and management VLAN ID.
Displays current power consumption by PoE devices and the Switch's power budget.
Details the process of configuring static VLAN parameters for the Switch.
Explains setting static MAC addresses for a port to control access and reduce broadcasting.
Details how to create rules for traffic filtering through the Switch based on specified criteria.
Explains how to activate one of the STP modes (RSTP, MRSTP, MSTP) on the Switch.
Details how to configure RSTP settings, including bridge priority and port parameters.
Guides on configuring MSTP settings, including regions, instances, and port assignments.
Explains how to limit bandwidth for incoming and outgoing traffic flows on a port.
Details how to limit broadcast, multicast, and DLF packets per second on ports.
Explains how to select a monitor port and specify traffic flow for mirroring.
Details how to configure static link aggregation and select traffic distribution types.
Explains how to enable LACP for dynamic link aggregation and port negotiation.
Details activating port authentication and configuring RADIUS server settings.
Guides on activating IEEE 802.1x security on the Switch and individual ports.
Explains how to enable and assign a guest VLAN to a port for unauthenticated users.
Details enabling port security, disabling MAC address learning, and configuring port limits.
Explains how to define classifiers and specify actions to act upon matching traffic rules.
Guides on enabling policy and displaying active classifiers configured in the Classifier screen.
Explains how to set priorities for Switch queues to distribute bandwidth across traffic queues.
Details settings for IGMP snooping, filtering, and managing unknown/reserved multicast frames.
Guides on configuring RADIUS server settings for authentication and accounting.
Offers troubleshooting steps for forgotten IP addresses, usernames, passwords, and login screen access.
To Next Page