ZyXEL Communications GS2200 Series - Maintenance

GS2200 Series User’s Guide 249
CHAPTER 34
Maintenance
34.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.
34.1.1 What You Can Do
•Use the Maintenance screen (Section 34.2 on page 249) to return to the factory defaults, save
the current configuration settings and restart the Switch.
•Use the Firmware Upgrade screen (Section 34.3 on page 251) to upload the latest firmware.
•Use the Restore Configuration screen (Section 34.4 on page 252) to upload a stored device
configuration file.
•Use the Backup Configuration screen (Section 34.5 on page 252) to save your configurations
for later use.
34.2 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 165 Management > Maintenance
The following table describes the labels in this screen.
Table 102 Management > Maintenance
LABEL DESCRIPTION
Current This field displays which configuration (Configuration 1 or Configuration 2) is currently
operating on the Switch.
Firmware
Upgrade
Click Click Here to go to the Firmware Upgrade screen.