Chapter 29 Error Disable
GS2200 Series User’s Guide
226
29.2 The Error Disable Screen
Use this screen to configure error disable related settings. Click Advanced Application >
Errdisable in the navigation panel to open the following screen.
Figure 147 Advanced Application > Errdisable
29.3 CPU Protection Configuration
Use this screen to limit the maximum number of control packets (ARP, BPDU and/or IGMP) that the
Switch can receive or transmit on a port. Click the Click Here link next to CPU protection in the
Advanced Application > Errdisable screen to display the screen as shown.
Note: After you configure this screen, make sure you also enable error detection for the
specific control packets in the Advanced Application > Errdisable > Errdisable
Detect screen.
Figure 148 Advanced Application > Errdisable > CPU protection
To Next Page
Loading...
