GS2200 Series User’s Guide 279
CHAPTER 36
Diagnostic
36.1 Overview
This chapter explains the Diagnostic screen.
Use the Diagnostic screen (Section 36.2 on page 279) to check system logs, ping IP addresses or
perform port tests.
36.2 Diagnostic
Click Management > Diagnostic in the navigation panel to open this screen. Use this screen to
check system logs, ping IP addresses or perform port tests.
Figure 189 Management > Diagnostic
The following table describes the labels in this screen.
Table 117 Management > Diagnostic
LABEL DESCRIPTION
System Log Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the syslog entry.
To Next Page
Loading...
