ZyXEL Communications GS2200 Series - DHCP Relay Tutorial Introduction; Creating a VLAN

Chapter 6 Tutorials
GS2200 Series User’s Guide
49
6.3.1 DHCP Relay Tutorial Introduction
In this example, you have configured your DHCP server (192.168.2.3) and want to have it assign a
specific IP address (say 172.16.1.18) to DHCP client A based on the system name, VLAN ID and
port number in the DHCP request. Client A connects to the Switch’s port 2 in VLAN 102.
Figure 32 Tutorial: DHCP Relay Scenario
6.3.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
1 Access the web configurator through the Switch’s management port.
VLAN 102
DHCP Server
Port 2
PVID=102
172.16.1.18
A
192.168.2.3