ENGLISH
15
In the following figure, Z is your ZyXEL Device, A is the CAT 5 Ethernet cable, B is the PoE
injector and C is the power cable.
" You can connect the ZyXEL Device to PoE via the ETHERNET port AND to
a power source via the POWER 12VDC port. If you do so, do not
disconnect the ETHERNET port before you disconnect the POWER
12VDC port. This causes the ZyXEL Device to restart.
6 Procedure to View a Product’s Certification(s)
1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL home page to go to that
product's page.
3 Select the certification you wish to view from this page.
To Next Page
Loading...
