ENGLISH
9
Configure Wireless Settings
1 Click WIRELESS in the
navigation panel. A
screen similar to the
following appears. Not all
fields are available in all
models.
" The wireless stations and the ZyXEL Device must use the same
SSID, channel ID and encryption settings for wireless
communication.
Operating Mode: Ensure that Access Point mode is selected.
802.11 Mode: Select the wireless standard you want your network to use. If you are
not sure which to select, select 802.11b+g.
Channel Width (NWA-3165 n/g mode only): Select the channel bandwidth you want
to use. If you are not sure, select 20/40 MHz.
Channel ID: Select the wireless channel you want your network to use. To have the
ZyXEL Device automatically select a channel, click Scan instead.
Short GI (NWA-3165 n/g mode only): Select Enable if your wireless clients support
the short guard interval. If you are not sure, select Disable.
A-MPDU Aggregation (NWA-3165 n/g mode only): Select Enable if your wireless
clients support the Aggregated MAC Protocol Data Unit standard. If you are not sure,
select Disable.
SSID Profile: Select the SSID profile you want to configure for network access from
the drop-down list box. This example uses the SSID03 profile.
2 Click Apply to save your settings.
To Next Page
Loading...
