Select “Manual” for registration type.
Figure 30 CONFIGURATION > Wireless > Controller > configuration
NXC:
Select “Always Accept” or “Manual” for registration type.
Always Accept: Controller trusts the managed AP automatically.
Manual: User trusts the managed AP.
Figure 31 CONFIGURATION > Wireless > Controller > configuration
If the option is “Manual”, don’t forget to trust the managed AP.
Figure 32 MONITOR > Wireless > AP Information > AP List > Add to Mgnt. AP
List
The icon of AP become gray after the controller managed the AP
successfully.
Figure 33 MONITOR > Wireless > AP Information > AP List > Add to Mgnt. AP
List
2 Does AP get the IP?
Check IP address via DHCP table or access AP by console cable.
To Next Page
Loading...
