2 Does AP get the IP?
Check IP address via DHCP table or access AP by console cable.
DHCP table:
If the DHCP server is one of the ZyXEL devices - UAG, ZyWALL and NXC, you
can check the IP by GUI.
Figure 62 DASHBOARD > Dashboard > System Status
Figure 63 DASHBOARD > Dashboard > System Status > DHCP Table
Console:
Get the IP by connecting console cable to access AP via terminal software.
Figure 64 Tera Term > AP > Router > show interface all
If the IP address doesn’t get the IP, it will show 0.0.0.0. Please check Ethernet
traffic between the DHCP server and AP.
Check the DHCP server if send the IP address to managed AP.
Check the DHCP server pool is full?
To Next Page
Loading...
