OK
Profile 0 satisfies most asynchronous applications. ZyXEL preset this profile to be the same as
the factory default. A summary of this profile is:
DTE speed 38400 bps
Link Option MULTI-AUTO
Data Format ASYNC
Command Set AT
DTR 108.2 Data Terminal Ready
RTS Ignored
DCD Tracks Carrier
DSR Always On
Error Control V.42bis + MN5
Flow Control CTS/RTS
Quality Action Adaptive Rate
Line Type Dial-up
AT&V2
Profile 1 Settings.................
B0 E1 L4 M1 N5 Q0 V1 X5
&B1 &C1 &D0 &G0 &H3 &J0 &K4 &L1 &M0 &N0 &P0 &R1
&S0 &X0 &Y1
*B0 *C0 *D0 *E0 *F0 *G0 *I0 *L0 *M0 *P9 *Q2 *S0
S00=000 S01=000 S02=043 S03=013 S04=010
S05=008 S06=003 S07=050 S08=002 S09=006
S10=007 S11=070 S12=000 S13=000 S14=004
S15=130 S16=000 S17=018 S18=000 S19=000
S20=002 S21=050 S22=000 S23=105 S24=138
S25=000 S26=000 S27=156 S28=068 S29=000
S30=000 S31=017 S32=019 S33=255 S34=030
S35=002 S36=000 S37=000 S38=000 S39=000
S40=000 S41=000 S42=000 S43=000 S44=000
S45=100 S46=028 S47=064 S48=000 S49=000
S50=000 S51=000 S52=000 S53=000 S54=000
S55=000 S56=000 S57=000 S58=000 S59=000
OK
Profile 1 is set for the needs of asynchronous 2-wire leased line operation. For U-1496B, the
default setting for this profile is the same as profile 0.
A summary of this profile is:
DTE speed 38400 bps
Link Option MULTI-AUTO
Data Format ASYNC
Command Set AT
DTR Ignored
To Next Page
Loading...
