Status Registers & Result Codes 97
Command bit dec hex Function and description Ref.
for 0.5 sec DCD on-off
transition
6 64 40 Force S0>=2 S0
7 128 80 Ignore calling tone, not to be
used as fax detection
S42= bit dec hex Bit mapped register +000
1 2 2 Enables throughput averaging
2 4 4 CND message will be forced
on even if AT02 is set
3 8 8 Disable escape sequence code
in answer mode
4 16 10 Disable V.17, 14,400 Fax in
calling mode, no effect to
answering mode &N32
5 32 20 Disable Data/Voice button
6 64 40 Disable ‘RINGING’ result
code
Xn
7 128 80 DCD forced on but pulse off
for 0.5 seconds at carrier loss
&C0
S43= bit dec hex Bit mapped register +000
0 1 1 Disable ZyXEL 16800 in
Multi-Auto mode
&N0
1 2 2 Disable ZyXEL 19200 in
Multi-Auto mode
&N0
2 4 4 Disable cellular mode
automatic transmit power
adjustment (see also S49b0-3)
&N0
3 0 0 Enable cellular mode in Multi-
Auto mode.
&N0
8 8 Disable cellular mode in Multi-
Auto
&N0
6 64 40 Enable 1.5 sec, pause between
To Next Page
Loading...
