ZyXEL Communications U-336E - Class 2 Command Set

Fax Operation 49
Value Modulation Speed Requirements
48 V.27ter 4800 required for FTM & FRM
72 V.29 7200 required for FTM & FRM
73 V.17 7200 required for FTM & FRM
74 V.17 w/st 7200 required for FTM & FRM
96 V.29 9600 required for FTM & FRM
97 V.17 9600 required for FTM & FRM
98 V.17 w/st 9600 required for FTM & FRM
121 V.17 12000 required for FTM & FRM
122 V.17 w/st 12000 required for FTM & FRM
145 V.17 14400 required for FTM & FRM
146 V.17 w/st 14400 required for FTM & FRM
* w/st means with V.17 short training
Class 2 Command Set
The following Class 2 commands are supported and implemented
per TIA PN2388 (8/20/90):
Command Syntax Description
+<command>=<value> Execute a command or set a
parameter.
+<command>=? Read permissible settings.
+<command>? Read current setting.
Supported Commands (per TIA PN2388 8/20/90)
Command Value Description
+FAA=n Auto-answer mode parameter:
n=0 Answer as set by +FCLASS.
n=1 DCE answers and auto-determines
type.
+FBADLIN=
<value>
0-255 Bad line threshold (number of
consecutive bad lines for a bad page
parameter):