ZyXEL Communications U-336E - Page 116

104 Status Registers & Result Codes
ATV0 ATV1 X0 X1 X2 X3 X4 X5 X6 X7
31 CONNECT 624000 % % % % @
32 CONNECT 124800 % % % % @
33 CONNECT 62400 % % % % @
34 CONNECT 41600 % % % % @
35 CONNECT 31200 % % % % @ $ #
36 CONNECT 24960 % % % % @
37 CONNECT 20800 % % % % @
38 CONNECT 33600 % % % % @ $ #
39 CONNECT 28800 % % % % @ $ #
40 CONNECT 26400 % % % % @ $ #
41 CONNECT 24000 % % % % @ $ #
42 CONNECT 21600 % % % % @ $ #
* Use S42.6 to disable 'RINGING' result code
** When more than one type of Distinctive Ring is
turned on (S40b3-6) ‘RING n’ will be reported,
n=Ring Type # (1-4)
Result Code Chart Symbol Reference:
V Supported
% Reports the DTE Speed as: <cr><lf>CONNECT
DTE_Speed<cr><lf>
@ CONNECT DTE_Speed/Protocol
DCE_Speed/Error_Control †
Example: CONNECT 38400/V.32bis
14400/V.42bis
$ <cr><lf>CONNECT DCE_Speed[/Error_Code]<cr><lf>
Example: CONNECT 14400/ARQ
# CONNECT DCE _Speed/Error_Code/Error_Control †
Example: CONNECT 14400/ARQ/ MNP5
† Data compression included. 'SREJ' is appended if a V.42
connection with selective reject is established.