Fax Operation 61
Response Value Function and Description
90-9F Refer to TIA-592 for details.
hsc=
A0-BF
Receive phase D hang up codes.
Refer to TIA-592 for details.
+FIS:vr,br,wd,ln,
df,ec,bf,st
Remote fax station capabilities (DIS
frame information) response refer to
+FIS=... command for a description
of sub-parameters.
+FNC:
"NSC FIF string"
Report NSC (non-standard
Commands) frame
+FNF:
"NSF FIF string"
Report NSF (non-standard Facilities)
frame.
+FNS:
"NSS FIF string"
Report NSS (non-standard Setup)
frame.
+FPI:
"CIG ID string"
Report remote ID response-Polling
Station ID (CIG).
+FPO Remote polling indication.
+FPS:ppr,lc,blc,c
blc,lbc
.30 phase C page reception response:
ppr=1 Received page good.
ppr=2 Page bad; retrain requested.
ppr=3 Page good; retrain requested.
ppr=4 Page good; remote request for
procedure interrupt accepted.
ppr=5 Page bad; retrain requested; remote
request for procedure interrupt
accepted.
The receiving DCE may count <lc>,
<blc>, <cblc> and <lbc> due to DCE
buffer overflow and report them:
lc: line count
blc: bad line count
cblc: maximum consecutive bad line
count
To Next Page
Loading...
