ZyXEL Communications U-336E - Page 95

AT Command Set Summaries 83
Command Options Function & Description Ref.
*Q0 No action to poor signal quality.
*Q1 Retrain action taken if signal quality
is poor. (See also S41.2)
*Q2 * Adaptive rate, automatic fall-back
or forward.
*Q3 Disconnect if signal quality is poor.
*Rab Read remote profile “b” to local S36.1
a=0-3 Local user profile number “a” S37.4-7
b=0-3 Remote user profile number “b” S37.0-3
b=4 Remote active configuration
b=5 Remote factory default
configuration
*Sn Secondary channel options
*S0 * Secondary channel disabled
*S1 Secondary channel enabled
*T Recall the last CND (Caller ID)
information.
S40.2
*V View the Password table
*Wab Write local configuration profile “a”
to remote user profile “b” and reset
remote modem from profile “b”
S36.1
a=0-3 Local user profile number “a” S37.4-7
a=4 Local active configuration
a=5 Local factory default configuration
b=0-3 Remote user profile number “b” S37.0-3
The AT+F commands are located in the chapter 6 Fax Operation