86 Status Registers & Result Codes
Command bit dec hex Function and description Ref.
Answer mode
1 0 0 Grant Remote Digital Loop-
back test request
&T4
2 2 Deny Remote Digital Loop-
back test
&T5
3,2 0 0 Dial-up line (Default) &L0
4 4 2-wire leased line &L1
8 8 4-wire leased line &L2
5,4 0 0 Internal clock (Default) &X0
16 10 External clock &X1
32 20 Remote clock &X2
7,6 0 0 Asynchronous data with
buffering (Default)
&M0
64 40 Asynchronous command,
synchronous data
&M1
128 80 Direct asynchronous, no data
buffering
&M2
192 C0 Synchronous &M3
S15= bit dec hex Bit-mapped register +130
0,1 0 0 Even parity
1 1 Odd parity
2 2 * No parity
2 0 0 * 1 stop bit
4 4 2 stop bits
4,3 0 0 * 10 bit character length *C0
8 8 11 bit character length *C1
16 10 9 bit character length *C2
24 18 8 bit character length *C3
7-5 0 0 Profile 0 as active settings after
power on
Z0
32 20 Profile 1 as active settings after
power on
Z1
To Next Page
Loading...
