this option set to “Ethernet”.
IP Address Assignment: Most ISP’s provide a dynamic IP address to residential
subscribers. Set the IP Address Assignment to “Auto” to automatically receive IP
address settings from your ISP. If you are paying for a fixed IP (static IP) please set the
IP Address Assignment option to “Fixed” and have your fixed IP info ready to type in on
the next screen.
This screen displays a summary or the “ISP Parameters” and “IP Address
Assignment” settings you selected on the previous screen. Click Next
to save the settings.
Note: Please be sure to verify that the settings are correct.
Once the wizard is done configuring the ZyWALL with the settings you
selected for the ISP parameters, click Next to finalize the setup.
Click Next to continue to the Registration option.
To Next Page
Loading...
