ZyXEL Communications VMG8623 - Connecting broadband | Dual Socket; Dual Socket Setup Steps

Connecting broadband | Dual Socket
5
If you are using a house phone, connect this in to the bottom part of the Openreach master socket.
Connect one end of the grey DSL cable (C) into the internet port of the Master socket (F) (please note that this must
not be an extension socket, and this should say Openreach on it). Connect the other end of the cable into the grey port
(DSL) on the back of your router (A).
Next, plug the power cable into your electricity supply, switch on, the connect the other end into the round
power socket on the back of your router
1
2
3
4
Switch on your router by pressing the black on/o button located on the back of the router. The power light will
turn orange, after a few minutes this will turn solid green. Please allow 10 minutes for the router to fully power up,
and all lights turn solid green or ashing green.
Please follow this set-up if you have a dual Master Socket.