To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications VMG8924-B10A and is the answer not in the manual?
General| Device Type | Wireless Router |
|---|---|
| Wireless Speed | 300 Mbps |
| Frequency Band | 2.4 GHz |
| ADSL | Yes |
| Power Supply | 12V DC, 1.5A |
| WAN Ports | 1 |
| LAN Ports | 4 |
| Wireless Standard | 802.11n |
| Security | WPA/WPA2 |
| DSL Standards | ADSL2+ |
Explains the methods available for managing the device, such as Web Configurator and TR-069.
Explains how to use the reset button to restore factory default settings.
Introduces the web-based management interface and its requirements.
Details the steps to access the web configurator, including login procedures.
Guides through the initial setup steps for time zone, Internet, and wireless settings.
Explains how to view the network connection status of the device and its clients.
Details how to view the device's status, system resources, and interface information.
Introduces Broadband screens for configuring Internet access.
Details how to change Internet access settings and view configured WAN services.
Explains how to add or edit WAN interface settings for Internet access.
Covers enabling Wireless LAN, setting SSID, and selecting wireless security mode.
Describes WPA-PSK and WPA2-PSK security modes for improved data encryption.
Explains how to permit or exclude access based on MAC addresses.
Details how to set LAN IP address, subnet mask, and DHCP settings.
Covers assigning static IP addresses to computers based on MAC addresses.
Details how to view and configure static route rules on the device.
Guides on adding or editing static route configurations.
Introduces Quality of Service for managing network delay and bandwidth.
Covers enabling QoS and setting upstream/downstream bandwidth.
Details configuring QoS queue assignments.
Guides on adding or editing QoS queue entries.
Explains how to add, edit, or delete QoS classifiers for traffic grouping.
Provides steps for configuring QoS class rules based on various criteria.
Covers configuring QoS policers to limit incoming traffic transmission rates.
Guides on adding or editing QoS policer configurations.
Introduces NAT concepts and capabilities for IP address translation.
Details how to forward incoming service requests to local network servers.
Guides on adding or editing port forwarding rules for services.
Explains how to create new NAT application rules.
Guides on creating and configuring port triggering rules.
Guides on adding or editing address mapping rules.
Details viewing and configuring DNS routes on the device.
Guides on manually adding or editing DNS name and IP address entries.
Covers enabling DDNS and configuring dynamic DNS settings.
Details how to manually add LAN interfaces to new groups or auto-add based on DHCP.
Guides on configuring interface groups, including WAN, LAN, and criteria.
Details setting up file sharing and managing shared folders on USB devices.
Guides on creating new shares for users to access USB devices.
Explains how to create user accounts for accessing secured shares.
Details enabling the device to share a USB printer on the LAN.
Explains enabling or disabling sharing of a USB printer via the device.
Details manually turning interfaces and LEDs on or off.
Covers configuring schedules for automatic interface and LED power control.
Explains how to configure a schedule rule for auto switch off.
Introduces firewall features for protecting the device and network from attacks.
Details setting the firewall security level and packet direction rules.
Covers configuring customized services and port numbers in firewall rules.
Guides on adding or editing customized service rules for firewall ACL configuration.
Details configuring incoming or outgoing filtering rules for IP traffic.
Explains how to add or edit Access Control List (ACL) rules.
Covers activating protection against Denial of Service (DoS) attacks.
Introduces MAC filtering for permitting access based on MAC addresses.
Details how to allow or deny wireless and LAN clients access via MAC filtering.
Introduces parental control features for blocking web sites and defining access schedules.
Details enabling parental control and managing rules and schedules.
Guides on configuring restricted access schedules and URL filtering.
Details viewing, adding, or editing time schedule rules.
Guides on configuring restricted access schedules with days and times.
Details viewing and managing device certificates and certification requests.
Guides on generating a certification request for the device.
Explains how to import a signed certificate into the device.
Guides on importing trusted CA certificates for authentication.
Introduces Virtual Private Network (VPN) and IPSec for secure communications.
Details viewing and managing VPN tunnel policies.
Guides on adding or editing VPN policies.
Details configuring SIP accounts for outgoing VoIP calls and incoming call matching.
Guides on configuring SIP accounts and mapping them to phone ports.
Covers viewing SIP service provider information and configuring settings.
Explains adding or editing SIP service provider details.
Details viewing system logs by severity level and category.
Covers viewing security-related logs by severity level and category.
Details viewing WAN traffic statistics, including bytes sent and received.
Covers viewing LAN and WLAN traffic statistics.
Details viewing VoIP registration, call status, and phone numbers.
Details viewing IP-to-MAC address mappings in the ARP table.
Details viewing IPv4 and IPv6 routing tables.
Covers viewing detailed DSL statistics.
Details viewing 3G status, service provider, and signal strength.
Details changing the system password for the admin user account.
Introduces remote management controls via Web Configurator.
Covers configuring services and ports for remote access.
Details configuring the device for management by an Auto Configuration Server (ACS).
Details activating TR-064 management on the LAN.
Details configuring SNMP agent functionality for network management.
Details configuring device time and date based on local time zone.
Details viewing, removing, and adding mail server information.
Guides on configuring required information for sending email via a mail server.
Details configuring device log settings and immediate alerts.
Explains how to upload new firmware to upgrade device performance.
Details the process of uploading firmware via HTTP.
Introduces configuration backup, restore, and factory reset options.
Details backup configuration to a file and restoring device configurations.
Introduces diagnostic screens for identifying device problems.
Details pinging, tracerouting, and nslookup for testing IP address connectivity.
Addresses issues with device power, LED behavior, and hardware connections.
Provides solutions for forgotten IP addresses, passwords, and login issues.
Troubleshoots problems with accessing the Internet via DSL or wireless connections.
Lists important safety precautions for product usage and handling.
