ZyXEL Communications VMG8924-B10A User Manual

Chapter 31 Remote Management
VMG8924-B10A User’s Guide
291
31.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the Device. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Figure 170 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 140 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
LABEL DESCRIPTION
IPv4 Address
Enter a public IPv4 IP address which is allowed to access the service on the Device from the
WAN.
Apply Click Apply to save your changes back to the Device.
Cancel Click Cancel to restore your previously saved settings.

ZyXEL Communications VMG8924-B10A Specifications

General

Device Type	Wireless Router
Wireless Speed	300 Mbps
Frequency Band	2.4 GHz
ADSL	Yes
Power Supply	12V DC, 1.5A
WAN Ports	1
LAN Ports	4
Wireless Standard	802.11n
Security	WPA/WPA2
DSL Standards	ADSL2+