ZyXEL Communications VMG8623 - Connecting broadband | Single Socket; Single Socket Setup Steps

Connecting broadband | Single Socket
If you are using a house phone, connect this into the phone socket on the microlter.
Connect the microlter into the master telephone socket (this should say Openreach on it)
Connect one end of the grey DSL cable into the microlter. Connect the other end of the cable into the grey port (DSL) on
the back of your router.
Next, plug the power cable into your electricity supply, switch on, connect the other end into the round power
socket on the back of your router.
Switch on your router by pressing the black on/o button located on the back of the router. The power light will
turn orange, after a few minutes this will turn solid green. Please allow 10 minutes for the router to fully power up,
and all lights turn solid green or ashing green.
1
2
3
4
5
7
Please follow this set-up if you have a single Master Socket.