Pack Contents
DoC
VMG8825-T50 Power Cable Ethernet Cable
Declaration
of conformity
Safety
Warning
Step 1
Hardware Installation
WAN
1-a
OR
LAN
POWER
ON
POWER
Use the Ethernet cable to connect from the blue WAN port on the router to
the ethernet port on the Optical Network Termination point (ONT).
Quick Start Guide
VMG8825-T50
Dual-Band Wireless AC/N WAN Gigabit Router
(Optional)
If you need any assistance please call us on 0333 0155156 or email help@digitalhomeuk.com
www.digitalhomeuk.com
Quick Start
Guide
1-c
1-b
Connect the power cable to the VMG8825-T50 and press the power button.
Note: It may take a couple of minutes to set up.
If using a wired connection, you can connect a computer to one of the LAN ports
as shown - using an Ethernet cable. We recommend CAT6 or above for optimum
performance.
1-a
1-c
1-b
ONT
To Next Page
Need help?
General
