2/2
Installation via the App
1. On your mobile device, go to your App
store and search for: Zyxel MPro Mesh app or
scan the QR code below. Open to download.
3. Once the app has located the router – it will prompt you to login as
admin. Connect to the router as admin (using admin password from the
rear of the router)
2. Switch your router on and open the app.
The app will search for your Zyxel router.
Then Power up your WAP6807 extender
4. Once logged in - click the ’+’ to
add mesh devices (WAP 6807)
6. Pair the router & extender by pressing
the ‘WPS’ button on the Extender
5. Select ‘use Wi-Fi’ scenario to connect
the WAP 6807 extender to the router
7. Wait 2 minutes for the router &
extender to complete the process
A note on positioning of the WAP 6807
The extender needs to be placed close to, but not in the Wi-Fi blackspot,
as it still needs to connect to the router to create the mesh network.
This way it also maxmimises the coverage available.
To Previous Page
Loading...
