Chapter 3 Web Configurator
WX Series User’s Guide
35
3.3.1.2 Icons
The navigation panel provides some icons on the right hand side.
Channel Status Use this screen to scan WiFi channel noises and view the results.
Home
Networking
Home
Networking
Use this screen to configure DHCP/Static IP settings, and other advanced
properties.
Security
Certificates Local Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA Use this screen to view and manage the list of the trusted CAs.
System Monitor
Log Log Use this screen to view the status of events that occurred to the WX
Device. You can export or email the logs.
WLAN Station
Status
WLAN Station
Status
Use this screen to view the WiFi stations that are currently associated with
the WX Device.
Maintenance
System System
Use this screen to set Device name.
User Account User Account Use this screen to change user password on the WX Device.
Remote
Management
Remote
Management
Use this screen to enable specific traffic directions for network services.
Time Time Use this screen to change your WX Device’s time and date.
Log Setting Log Setting Use this screen to change your WX Device’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your WX Device.
Backup/Restore Backup/Restore Use this screen to backup and restore your WX Device’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the WX Device without turning the power off.
Diagnostic Ping&Traceroute Use this screen to identify problems with the WX Device. You can use
Ping or TraceRoute to help you identify problems.
Table 9 Configuration Menus Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
