WX Series User’s Guide
82
CHAPTER 6
Web Tutorials
6.1 Overview
This chapter provides Web Configurator tutorials for setting up a secure WiFi network for your WX Device.
• WiFi Network Setup
• Device Maintenance
6.2 WiFi Network Setup
Thomas wants to set up a WiFi network so that he can use his notebook to access the Internet. In this WiFi
network, the WX Device serves as an access point (AP), and the notebook is the WiFi client. The WiFi
client can access the Internet through the AP.
Thomas has to configure the WiFi network settings on the WX Device. Then he can set up a WiFi network
using WPS (Section 6.2.2 on page 84) or manual configuration (Section 6.2.3 on page 85).
6.2.1 Setting Up a WiFi Network
This example uses the following parameters to set up a WiFi network.
1 Click Network Setting > Wireless to open the General screen. Select More Secure as the security level
and WPA2-PSK as the security mode. Configure the screen using the provided parameters (see Section
6.2.1 on page 82). Click Apply.
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n/ax Mixed
To Next Page
Loading...
