Chapter 4 App Tutorials
WX Series User’s Guide
42
Note: You do not need to press the WPS button on the Zyxel MPro Mesh router.
10 After the WiFi LED turns steady green or fast blinking, wait for up to 2 minutes. The POWER LED should start
blinking. The POWER and LINK LED will turn solid green if the pairing process is successful. You can also
check the result on the app screen.
11 Click Done to finish the pairing process. The MPro Mesh Router (the controller) will undergo an auto-
configuration after a Mesh network is established. (See Section 1.2 on page 15 for more information.)
Check the status of your MPro Mesh network on the Home screen.
To Next Page
Loading...
