Always keep the 1&1 LTE-Antenne out of the reach of children.
Using the 1&1 LTE-Antenne as a toy can lead to injury. Small
parts could be swallowed.
Do not use the 1&1 LTE-Antenne near or inside metal const-
ructions or installations, which emit electromagnetic waves, as
these can cause damage to the signal receiver.
The 1&1 LTE-Antenne is not waterproof. Always keep the 1&1
LTE-Antenne dry and store it in a cool place away from direct
sunlight.
Do not use the 1&1 LTE-Antenne immediately after a sudden
change in temperature. Using the device in this situation could
lead to the formation of condensation inside and on the device.
Do not switch it on until it is fully dry.
Always take care when handling the 1&1 LTE-Antenne. Do not
drop it, bend it or subject it to impact. This could damage the
1&1 LTE-Antenne.
The recommended operating temperature is between -10 °C
and +60 °C, with an air humidity of between 5 and 95%.
These instructions describe the 1&1 Sofort-Start (1&1 Start Now)
with various 1&1 HomeServers or the 1&1 BusinessServer.
These instructions concern the FRITZ!Box 7520, FRITZ!Box 7530,
FRITZ!Box 7560, FRITZ!Box 7580 or the FRITZ!Box 7590,
manufactured by AVM.
As such, the user interface and the network name (SSID) contain
the name of the manufacturer: AVM FRITZ!Box 7530, FRITZ!Box
7560, FRITZ!Box 7580 or FRITZ!Box 7590. To improve readability,
the name 1&1 HomeServer will be used in this guide to refer to all
devices (1&1 HomeServer and 1&1 BusinessServer). Any relevant
differences will be indicated as required.
The manufacturer's address is: AVM GmbH
Alt-Moabit 95
10559 Berlin
avm.de
The 1&1 LTE-Antenne (1&1 LTE antenna) is the XSStick LW1208,
manufactured by 4G Systems.
The manufacturer's address is: 4G-Systems GmbH & Co. KG
Unter Goldschmied 6
50667 Cologne
4g-systems.com
Manufacturer’s information
5
To Next Page
Loading...
Need help?
General
