Step 7
Put the cover back on and place the 1&1
LTE-Antenne in the USB port on the 1&1
HomeServer. Set up the 1&1 HomeServer.
For this, see: Set up 1&1 HomeServer.
> page 10
Step 4
To remove the SIM card holder, slide it
backwards and then tilt it upwards.
Step 5
Place the micro SIM card so the chip is facing
downwards. The angled corner denotes the
direction of the USB cable.
Step 6
Ensure that the micro SIM card has been
inserted correctly and does not stick out.
Tilt the SIM card holder back downwards
and lock in place.
9