Need help?Do you have a question about the 1-CUBE GMD and is the answer not in the manual?
General| Accuracy | ±2% FS |
|---|---|
| Operating temperature | -20°C to +50°C |
| Power supply | 24V DC or 110-230V AC |
| Gas temperature | 0~50 °C |
| Output signal | 4-20mA, RS485, Relay |
Procedure for collecting samples for measurement.
Steps to empty the device after sample measurement.
Instructions for cleaning the measuring device.
Step-by-step guide for performing measurements.
Detailed steps for measuring CO2 content.
Procedure to discharge the sample from the device.
Instructions for cleaning the device after use.
How to operate the device's electronic controls.
Steps to turn the device on and off.
Instructions for charging the device's battery.
Detailed procedure for measuring CO2 content via electronics.
How to access stored CO2 measurement data.
Steps to erase stored CO2 measurement data.
To Next Page