How to connect your Airpods(First Generation) with B10?
1.Plug B10 into USB2.0 or USB3.0 port on your Mac.
2.Press and hold the multi-function button on B10 for2~3 seconds to enter paring mode
the LED indicator will alternatively flashes blue and red.
3.Put your Airpods in the case and open the lid, press and hold the button on the back of
the case until you see the status light start pulsing white,then let go.
4.Please go: System preferences>Sound>Output,please select B10 USB as the sound
output device> Input,please select B10 USB as the sound input device.
5.If you need to use the Microphone on your Airpods, Please double click the
multi-function button on B10 to enter the "Hands free/Call mode(the LED indicator start
pulsing blue every 3 seconds)" to use the Microphone.
Warning: VOIP call mode does NOT support aptX and aptX LL!!! Please EXIT VOIP
CALL MODE AFTER USING THE MICROPHONE !!!
To Next Page
Loading...
General