41
9
OS Update
To update the operating system, download the latest OS file from
the 2box web site. Connect the DrumIt Five with an USB cable to the
host computer and start in USB mode. Then copy the new
DrumItxyz.bin file (xyz being the version number) to the DrumIt
Five root folder and restart (power off, power on).
If all went well, the new OS version number is shown on the lower
right side of the LCD, otherwise an error message will appear. The
boot program will automatically load the most recent version, but to
save space, one can delete any previous versions.
Please make a backup of the original DrumIt.dkit file. If you save
UNIT or KIT settings with OS 1.20 they will be in 1.20 format which
is not backward compatible with earlier OS versions.
Reset
To reset the system to factory default settings, there are two
possibilities.
Download the DrumIt.dkit file from the 2box web site. Connect the
DrumIt Five with an USB cable to the host computer and start in
USB mode. Open the DrumIt drive and make a copy of the original
DrumIt.dkit. Then copy the new DrumIt.dkit file to the DrumIt Five
root folder (choose overwrite if asked) and restart.
Otherwise one can use the initialize function on the UNIT-PREF page.
This will copy the unit or kit settings from the DrumItInit.dkit file to
the DrumIt.dkit file.
If the sound library on the DrumIt Five has been changed, some kits
might be incomplete (silent drum channels). However, the original
sound file name on the KIT-DRUM page is still shown, but without a
folder name and with a question mark as the sound number. To
make the kit complete again, please copy the missing sound file(s)
back to the DrumIt Five.
To Next Page
Loading...
