2easy 2-wire Series - DR (DOT-MATRIX) Module; Card and Keyfob Management

2 EASY
-17-
DR MODULE
Card/keyfob reader
Dot-matrix display
Features
Card/Keyfob Operation
• Up to 320 user cards can be registered by door station
• Easy management with indicators and sounds
• The distance of card reading is 3 to 5 cm
• The Master Cards are necessary when you add or delete user cards. Please
keep them safe for future use
• Creating New Master Cards
a. Power On and join together EB+ and EB- wires. Double beep will sound
b. Toggle DIP4 switch four times. Double beep will sound
c. Show the new, to be Master ADD Card, to the Proximity Reader, single beep will sound
d. Show the new, to be Master Delete Card, to the Proximity Reader, single beep will sound
Dot-matrix: 16 x 24 dot matrix display
Card Reader: support 125KHz and 13.56MHz unencrypted RFID tags
8. DR (DOT-MATRIX) Module
IN
OUT
Connect to main
or last module
Connect to next
module
VD Module
CN-LK
+12V LK- LK+ NO EB- EB+
SET
1 2 3 4 5 6
ON DIP
ADD
Ma
ster
C
a
r
d
Ma
ster
DELETE
C
a
r
d