Need help?Do you have a question about the 2easy 2-wire Series and is the answer not in the manual?
General| Wiring | 2-Wire |
|---|---|
| Operating Temperature | -10°C to +55°C |
| Humidity | 10% - 90% RH, non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Compatibility | 2easy series components |
| Material | Varies by component (e.g., plastic, aluminum alloy) |
Step-by-step guide for installing the door station using the flush mounting method.
Step-by-step guide for installing the door station using the surface mounting method.
Explains how to configure the VD module using DIP switches for ID setting and other functions.
Details how to configure unlocking mode, time, ringtone, volume, and camera settings.
Outlines the process for entering programming mode and changing system parameters.
Presents tables detailing setting codes for various functions of the MK module.
Covers operations for managing user cards and keyfobs, including creation, addition, and deletion.
Explains how call codes are automatically assigned to buttons based on DIP switch settings.
Provides instructions and card size for replacing the nametag on the S4 module.
Shows the steps for flush mounting the intercom modules.
Shows the steps for surface mounting the intercom modules.
Describes the connection terminals and ports for MK and DR modules.
Details the connection terminals and DIP switch configuration for the S4 module.
Shows the wiring connections for combined VD, BL, and S4 modules.
Guides on connecting door locks using the system's internal power supply.
Explains how to connect door locks using an external power supply.
To Next Page
