Part No. 9155064
Backplate,
2(w)x2(h)-module
Part No. 9155065
Backplate,
2(w)x3(h)-module
Part No. 9155066
Backplate,
3(w)x2(h)-module
Part No. 9155067
Backplate,
3(w)x3(h)-module
The mounting boxes are compatible with the ;2N Helios IP Verso
®
2N Access Unit
®
refer to the table:
Part No. Name Description
9155011
2N Helios IP
®
Verso – Flush
mounting frame,
1-module
Covering frame for the 1-module brick/plasterboard
flush mounting box. This 1-module frame is used when
a module is added to an existing installation or a
separate module is mounted onto an extended
interconnecting cable, for an OUT card reader, for
example. Remember to order the frame when you
order a 1-module flush mounting box, Part No.
9155014.
9155012
2N Helios IP
®
Verso – Flush
mounting frame,
2-module
Covering frame for the 2-module brick/plasterboard
flush mounting box. Remember to order the frame
when you order a 2-module flush mounting box, Part
No. 9155015.
9155013
2N Helios IP
®
Verso – Flush
mounting frame,
3-module
Covering frame for the 3-module brick/plasterboard
flush mounting box. Remember to order the frame
when you order a 3-module flush mounting box, Part
No. 9155016.
9155014
2N Helios IP
®
Verso – Flush
mounting box,
1-module
The box is designed for brick/plasterboard flush
mounting of a 1-module installation. Supplied including
accessories for multiple box assemblies.
To Next Page
Loading...
