Need help?Do you have a question about the 2N Access Unit and is the answer not in the manual?
General| Category | IP Access Controllers |
|---|---|
| Outputs | 2 relay outputs |
| Tamper Switch | Yes |
| Technology | IP-based |
| Power Supply | 12V DC or PoE |
| Connectivity | Ethernet |
| Communication | TCP/IP |
| Card Reader | Optional |
| Protocols Supported | SIP, HTTP, HTTPS, TCP/IP |
| Mounting | Surface, Flush |
| Operating Voltage | 12V DC or PoE |
| Communication Interface | Ethernet |
Manages user information, access rights, and related settings for the 2N Access Unit.
Configuration options for the physical components and modules of the 2N Access Unit.
Configures the output switches for controlling peripherals like door locks and lighting.
Settings related to door lock control, door sensor input, and exit button functions.
Settings for the RFID card reader, including allowed card types and interface configuration.
Enables custom logic and interconnections with third-party systems via 2N Automation.
Core system settings, including network, date/time, licensing, and maintenance.
Configuration of network settings, IP address, DHCP, VLAN, and port modes.
Options for backing up, restoring, and resetting the device configuration and firmware.
To Next Page
