2N Access Unit - Card Reader

2N Access Unit Configuration Manual
57 / 134
•
•
•
•
5.3.6 Card Reader
Card Reader helps you control access to your building effectively using contactless RFID cards.
The supported card types depend on the card reader model used.
List of Parameters
Door–set the reader direction (Arrival, Departure) for the Attendance system purposes.
Associated Switch– select a switch to be activated whenever a valid card is applied. The
set value is not applied when a valid user card is tapped on the reader while the double
authentication mode is enabled. In this case, a numeric switch activating code is required
to identify the switch to be activated.
RFID Interface– choose the permitted types of cards (select/unselect).
Samsung NFC Compatibility– allows for Samsung Smartphone NFC.