2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
72 / 134
•
•
•
Induction Loop Module Configuration
Maximum Power–set the maximum transmission power for the induction loop antenna.
A higher transmission power means a wider range, but less power for other intercom
functions. The convenient default value is 0.25 W under normal circumstances.
Display Module Configuration
Module Name–set the module name for input/output specification in the SetOutput,
GetInput and InputChanged objects in the2NAutomation.
Door–set the reader direction (Arrival, Departure) for the Attendance system purposes.
Caution
