2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
80 / 134
•
•
•
•
•
•
Relay Modules
Switch-On Duration – set the relay module activation time(range of 1 – 600 s).
Enabled– activate/deactivate the AXIS A9188 module used for lift control for up to 8
floors.
IP address– AXIS A9188 IP address.
State– display the state of the connected AXIS A9188 module (Error/Access denied/
Ready/Offline).
Serial number– AXIS A9188 serial number.
Username– external device authentication username. The parameter is only mandatory if
the external device requests authentication.