2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
85 / 134
•
•
•
•
•
•
•
Server address– set the SMTP server address to which e-mails shall be sent.
Server port– specify the SMTP server port. Modify the value only if the SMTP server
setting is substandard. The typical SMTP port value is 25.
Username– enter a valid username for login if the SMTP server requires authentication, or
leave the field empty if not.
Password– enter the SMTP server login password.
Client certificate– specify the client certificate and private key for the intercom – SMTP
server communication encryption. Choose one of the three sets of user certificates and
private keys (refer to the Certificates subs.) or keep theSelfSignedsetting, in which the
certificate automatically generated upon the first intercom power up is used.
From address–set the sender address for all outgoing e-mails from the device.
Deliver In– set the time limit for delivering an e-mail to an inaccessible SMTP server.