2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
121 / 134
•
Result Description
In progress ... Update in progress
Updated The configuration/firmware update has been
successful. With firmware update, the device will be
restarted in a few seconds.
Firmware is up to date. The firmware update attempt reveals that the latest
firmware version has been loaded.
DHCP Option 66 has failed. The server address loading via DHCP Option 66 or 150
has failed.
Invalid domain name The server domain name is invalid due to wrong
configuration or unavailability of the DNS server.
Server Not Found The requested HTTP/TFTP server fails to reply.
Download failed An unspecified error occurred during file download.
File not found The file has not been found on the server.
File invalid The file to be downloaded is corrupted or of a wrong
type.
Configuration
Use the Configuration tab to set automatic configuration download from the server defined by
you. The2NAccess Unitperiodically downloads a file from the server and gets reconfigured
without getting restarted.
Firmware update enabled– enable automatic firmware/configuration updating from the
TFTP/HTTP server.