2N Access Unit - 2 N Access Unit Configuration Manual; 5.2.2 Time Profiles; ;

2N Access Unit Configuration Manual
31 / 134
•
•
•
•
•
•
•
Tap the card on the card reader.
The card ID is successfully read.
Do not forget to save the configuration.
.
5.2.2 Time Profiles
Such2NAccess Unitfunctions as RFID card/numeric code access, for example, can be time-
limited by being assigned atime profile. By assigning a time profile you can:
block all calls to a selected user beyond the set time interval
block calls to selected user phone numbers beyond the set time interval
block RFID access for a user beyond the set time interval
block numeric code access for a user beyond the set time interval
block switch activation beyond the set time interval