2N Access Unit - 2 N Access Unit Configuration Manual; 5.5.5 Auto Provisioning; ;

2N Access Unit Configuration Manual
117 / 134
•
•
•
5.5.5 Auto Provisioning
The2NAccess Unitallows you to update firmware and configuration manually or automatically
from a storage on a TFTP/HTTP server selected by you according to predefined rules.
You can configure the TFTP and HTTP server address manually. The2NAccess Unitsupports
automatic address identification via the local DHCP server (Option 66).

My2N
Serial Number–display the serial number of the device to which the valid My2N code
applies.
My2N Security Code– display the full application activating code.
GENERATE NEW– the active My2N Security Code will be invalidated and a new one will be
generated.
