2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
74 / 134
•
•
•
•
•
Touch Keypad
Module Name–set the module name for logging events from the keypad.
Door–set the reader direction (Door Entry, Door Exit) for the Attendance system
purposes.
Blink at Keystroke–set keystroke light signalling for noisy environments where acoustic
signals are difficult to hear.
Forward to Wiegand Output– seta group of Wiegand outputs to which all pressed keys
are to be forwarded.
Transmitted Code Format– select a 4bit or 8bit (higher security) format for the codes to
be transmitted.