2N Access Unit - Door

2N Access Unit Configuration Manual
43 / 134
•
•
•
•
•
•
5.3.2 Door
Door
Assigned switch– select a switch for the electromagnetic door lock control.The switch
state controls the door unlocking signalling (green door symbol, green LED).
Assigned input– define one (or none) of the logical inputs for open door detection.
Input Mode– set the active input mode (polarity).Non Inverted / Inverted.
Unauthorised door open detection– detect if the door is open when switch has been
locked.
Door open too long detection– door open too long detection.
Maximum door open time– maximum permitted door open duration in seconds.