2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
44 / 134
•
•
•
•
•
•
•
•
Assigned input– select one (or none) of the logic inputs for the departure button
function. The departure button input activation activates the selected switch. The
activation time and mode are set by the selected switch parameters.
Input mode– set the active input mode (polarity).
Enabled– enable connection with the Genetec Synergis external security system.
Synergis server address- Synergis server IP address or domain name.
Username– authentication user name.
Format–set the card reading format for sending card IDs to Genetec Synergis.
Connection state–display the current Synergis server connection state or error state
description if necessary.
Failure reason–display the failure reason of the last Synergis server connection
attempt–the last error response, 404 Not Found, for example.