2N Access Unit - 2 N Access Unit Configuration Manual; ;

2N Access Unit Configuration Manual
68 / 134
•
•
•
•
•
•
Bluetooth Module
Module Name–set the module name for logging events from the Bluetooth module.
Door–set the reader direction (Not specified, Arrival, Departure) for the Attendance
system purposes.
Associated Switch–set the switch to be activated after user authentication via this
module. If you set Door Lock Switch, the authentication rules specified in Hardware / Door
will be used.
Signal Range– set the maximum signal range, i.e. the distance within which the
Bluetooth module can communicate with the mobile phone:
Short–less than 2 m for most phones
Long– maximum possible range
•
Tip
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.
