2N Access Unit - Maintenance

2N Access Unit Configuration Manual
128 / 134
•
•
•
5.5.7 Maintenance
Use this menu to maintain your2NAccess Unitconfiguration and firmware. You can back up
and reset all parameters, update firmware and/or reset default settings here.
Restore Configuration– reset configuration from the preceding backup. Press the button
to display a dialogue window for you to select and upload the configuration file to the 2N
Access Unit. You can also choose before uploadingwhether the directory, network
parameters or SIP exchange connection settings from the configuration file shall be
applied.
Backup Configuration– back up the complete current configuration of your2N Access
Unit Press the button to download the configuration file to your PC.
Reset Configuration– reset default values for all of the2N Access Unit parameters except
for the network settings. Use the respective jumper or pushResetto reset all the2N
Access Unit parameters; refer to the Installation Manual of your intercom.
•
Caution
Treat the file cautiously as the 2N Access Unit configuration may include delicate
information such as user phone numbers and access codes.
